• Find Tape Drive Serial Number Solaris Os

    find tape drive serial number solaris os


    Find Tape Drive Serial Number Solaris Os -> http://urlin.us/5dkm7




















































    Find Tape Drive Serial Number Solaris Os


    Looks like you have not understood my questions. If the output of the cfgadm -al command shows that a drive is unconfigured, run the command again, this time using the -c (configure) switch. The command is a single line, but has been formatted as two to fit the page layout: rootsolaris:# updatedrv -d -i '"/pci0/pci0/pci9/SUNW,qlc0,1/fp0,0:fc::500104f0008e6d78"' sgen rootsolaris:# The library has now been configured using the sgen driver If you are configuring a high-availability file system, go to Configuring Storage for High-Availability File Systems. Configuring Primary Storage In a SAM-QFS file system, primary disk or solid-state disk devices store files that are being actively used and modified. Look for med-changer in the Type column of the second row of each record. In the example, the adddrv command indicates that the driver is already installed. Configure one SAM-QFS archival disk volume per file system or ZFS data set and set a quota for the amount of storage space that the archival disk volume can occupy. Sun (Solaris, OS) probe-scsi-all You must halt the system first. rootsolaris:# cat /etc/release Oracle Solaris 10 9/10 s10su9wos14a SPARC Copyright (c) 2010, Oracle and/or its affiliates.


    You need to know whether the disk controller or disk devices that are reported by the cldevice show command are on redundant storage. In an archiving file system, the small reduction in disk cache capacity is often completely offset by the comparatively unlimited capacity available in the archive. Use the command adddrv -iscsiclass,08 sgen. You will need the information for Configuring the Basic File System (Chapter 6), and you may wish to include it when Backing Up the SAM-QFS Configuration (Chapter 13). To insure redundant data paths, you must provide multiple host bus adapters (HBAs) that are configured from a single node, and you must configure Oracle Solaris I/O multipathing software (for more information, see the Oracle Solaris SAN Configuration and Multipathing Guide in the Oracle Solaris 11.1 Information Library, or see the stmsboot man page). rootsolaris:# vi /root/device-mappings.txt LOGICAL DEVICE DEVICE SERIAL NUMBER ACSLS DEVICE ADDRESS -------------- -------------------- ---------------------------------- /dev/rmt/0 HU92K00200 (acs=0, lsm=2, panel=10, drive=17) /dev/rmt/1 HU92K00208 (acs=0, lsm=2, panel=10, drive=18) /dev/rmt/2 HU92K00339 (acs=0, lsm=2, panel=10, drive=10) /dev/rmt/3 HU92K00289 (acs=0, lsm=2, panel=10, drive=12) :wq Keep the mappings file. Quotas help to keep SAM-QFS archiving processes from trying to use more of the aggregate storage than it has available. Displaying Tape Drive Status You can use the status option with the mt command to get status information about tape drives. Previous Thread Next Thread Thread Tools Show Printable Version Email this Page Subscribe to this Thread Display Modes Linear Mode Switch to Hybrid Mode Switch to Threaded Mode Search this Thread Advanced Search More UNIX and Linux Forum Topics You Might Find Helpful Thread Thread Starter Forum Replies Last Post tar to tape drive command djehresmann UNIX for Advanced & Expert Users 7 10-12-2010 06:05 PM /dev/rmt is empty - Trying to make Tape Drive Functional cvaughn Solaris 7 11-03-2009 10:22 AM How to determine what type of backup I've on the tape fraydey UNIX for Dummies Questions & Answers 2 05-12-2008 08:52 AM Command to determine Tape Type Surdeymon AIX 4 06-10-2005 02:19 PM All times are GMT -4.


    In the example, the PhysId column of the media changer record contains the path /devices/pci0/pci0/pci9/SUNW,qlc0,1/fp0,0:fc::500104f0008e6d78, so we select the portion of the string following /devices/ as the alias (note that this physical path has been abbreviated to fit the space available below): rootsolaris:# grep scsiclass,08 /etc/driveraliases sdrv "scsiclass,08" rootsolaris:# cfgadm -vl ApId Receptacle Occupant Condition Information When Type Busy PhysId c3 connected configured unknown unavailable scsi-sas n /devices/pci0/pci0/pci2/scsi0:scsi c5::500104f0008e6d78 connected configured unknown unavailable med-changer y /devices/ pci0/./SUNW,qlc0,1/fp0,0:fc::500104f0008e6d78 . If you want to configure a QFS shared file system on a cluster, you must provide highly available, redundant data paths and storage. Proceed as follows: Log in to the SAM-QFS server host as root. Solid-state devices are particularly useful for storing metadata that is, by its nature, frequently updated and frequently read. In the example, we are using the vi editor to delete the permissions, ownership, and date attributes from the /dev/rmt/ list, while adding headers and space for library device information: rootsolaris:# vi /root/device-mappings.txt LOGICAL DEVICE DEVICE SERIAL NUMBER ACSLS DEVICE ADDRESS -------------- -------------------- ---------------------------------- /dev/rmt/0 /dev/rmt/1 /dev/rmt/2 /dev/rmt/3 For each logical device name listed in /dev/rmt/, display the device serial number.


    For a given number of disks, smaller, 3+1 and 4+1 RAID 5 volume groups provide greater parallelism and thus higher input/output (I/O) performance than larger volume groups. If the grep command returns some-driver " alias ", where some-driver is some driver other than sgen and where alias is one of the aliases listed above, then the alias is already assigned to the other driver. Configure Devices for the Primary Cache Determine the total capacity required to hold the data that you plan to store in each file system. The first column of the output displays the attachment-point ID (Apid), which consists of the controller number of the host bus adapter and the WWN, separated by colons. RS-6000/AIX Only the IBM versions of the 8505 and Mammoth firmware are displayed in the error log and vpd. So, SAM-QFS Release 5.4 and later uses the default sgen driver in place of the legacy SAM-QFS samst driver. An array that is controlled by dedicated controller hardware generally offers higher performance than an array controlled by software running on a shared, general-purpose processor. Repeat this procedure until the device-mappings file holds entries that map all devices that the library assigns to the SAM-QFS host to Solaris logical device names. So we attach the driver: rootsolaris:# adddrv -i scsiclass,08 sgen Driver (sgen) is already installed. Then save the file and close the editor.


    So install it. Quote: 2) I would like to know what are the key differences between IBM LTO Generation 1 and Generation 2 tape drives ? Speed and capacity are the differences, if you want more detail than that I suggest you try google. Plan to write your file system's metadata to RAID-10 disks. UNIX & Linux Forums > Operating Systems > Solaris Member Name Remember Me? Password Home Search Forums Register Forum RulesMan PagesUnix Commands Linux Commands FAQ Members Today's Posts Solaris The Solaris Operating System, usually known simply as Solaris, is a Unix-based operating system introduced by Sun Microsystems. Community Home > Page Not Found Community Hewlett Packard Enterprise Community CommunityUsers turn on suggestions Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. See "Configure QFS Metadata Servers on SC-RAC Nodes Using Software RAID Storage" for details. The current drive serial number and firmware level will be displayed.. 496fe58675

    vk wings of piano full version
    view port autocad 2016 keygen
    postal 3 only keygen downloader
    design of cable stayed bridge using sap 2000 free download full version
    serialization scheme was not recognized spss 22 crack
    download youcam 6 full crack
    crack para euro truck simulator 2 1.7.0
    ahnlab v3 internet security 8.0 serial crack keygen
    tutoriales de autocad 2009 keygen
    quran majeed ipa cracked screen

  • Commentaires

    Aucun commentaire pour le moment

    Suivre le flux RSS des commentaires

    Ajouter un commentaire

    Nom / Pseudo :

    E-mail (facultatif) :

    Site Web (facultatif) :

    Commentaire :